Faucet installation Lakeland FL done right the first time

When you need faucet installation Lakeland FL homeowners trust, our team handles everything from a dripping kitchen mixer to a full bathroom faucet swap. We work on copper pipe, PEX tubing, and PVC pipe, and we test every connection before we leave.

Serving Lakeland and nearby areas.

How big is the job?

Swap plus repair

New faucet plus a new shutoff valve or supply line replacement.

  1. 1. Single swap One faucet replaced, existing shutoff valve and supply lines in good shape.
  2. 2. Swap plus repair New faucet plus a new shutoff valve or supply line replacement.
  3. 3. Multi-fixture Two or more faucets, or a kitchen faucet with disposal and filtration connections.
  • 30Services from one local team
  • 20Areas served around Lakeland
  • Shutoff firstWater off before we start
  • Dry testEvery connection checked

What our faucet installation includes

Every faucet install covers the parts and labor to remove your old fixture and connect the new one.

Faucet Installation in Lakeland : plumber placing the decorative escutcheon plate onto a new outdoor hose bib, ensuring a

Work order

Faucet Installation
  • Old fixture removal: We disconnect the supply lines, remove the old faucet, and clean the mounting surface. If the old fixture is stuck or corroded, we use a basin wrench and penetrating oil to free it without damaging the countertop or sink.
  • New supply lines: We replace the supply lines as part of the install. Old lines often have mineral buildup or cracked washers, and reusing them is a common cause of leaks. We use braided stainless or PEX lines rated for your fixture.
  • New shutoff valve if needed: If your angle stop will not close fully or is corroded, we replace it. A working shutoff valve is critical for future repairs and for stopping water fast in an emergency. We carry common sizes on the truck.
  • Leak test and pressure check: After the faucet is connected, we turn the water on and run hot and cold for two minutes. We check every connection with a dry paper towel and confirm residential pressure with a gauge, usually 40 to 60 psi.
  • Cleanup and old fixture haul-away: We wipe down the sink, countertop, and cabinet floor, then bag the old fixture. If you want it hauled away, we take it with us. You get a walkthrough of the new faucet and where the shutoff valves are.

What the first visit covers

First visit

We inspect the shutoff valve, supply lines, and drain assembly, then install the new faucet and test for leaks.

Faucet installation for homes

We install kitchen, bathroom, and outdoor faucets in houses across Lakeland.

  • Kitchen faucets

    Pull-down, pull-out, and standard models.

  • Bathroom faucets

    Single-hole, centerset, and widespread.

  • Outdoor hose bibs

    Frost-proof and standard replacements.

  • Customer-supplied fixtures

    We install faucets you bought yourself.

Pipe Repair in Lakeland : plumber applying pipe wrap to reinforce a weak section of an old cast iron drain pipe in a basement

Faucet installation for businesses

We handle faucet installs for rental properties, offices, and small commercial spaces.

  • Rental properties

    Multi-unit faucet replacement.

  • Offices and retail

    Restroom and breakroom faucets.

  • Restaurants

    Kitchen and handwash sink faucets.

faucet installation Lakeland FL: what to expect

A faucet that drips or will not shut off wastes water and can damage the cabinet below. Installing a new one correctly takes a few hours and prevents bigger problems.

Faucet installation Lakeland FL is the removal of an old or failing fixture and the fitting of a new one to your existing supply lines and drain assembly. It sounds simple, but the job involves shutting off the water, disconnecting supply lines, cleaning the mounting surface, setting a new wax ring or gasket, and torqueing the supply nuts to spec. We use a pipe wrench, a basin wrench, and Teflon tape on every threaded connection. If your shutoff valve is corroded, we replace it while we are under the sink.

Lakeland's hard water leaves mineral buildup that eats through rubber seals and cartridges faster than most homeowners expect. A faucet that drips in a Dixieland bungalow after three years is usually a hard water casualty, not a defective fixture. We see the same pattern in Lake Morton and Lake Hollingsworth homes built before 1980. If you are searching for faucet installation near me in Lakeland FL, we can usually get to you the same day you call.

Pipe Replacement in Lakeland : plumber carefully removing old, corroded galvanized pipes from a wall cavity, exposing the
What it is
Removing an old faucet and connecting a new one.
When it helps
Drips, low pressure, stiff handles, or a remodel.
What you get
A working faucet with new supply lines and a leak test.

Our faucet installation process

Every job follows the same five steps. You know what happens, who does it, and how long it takes before we start.

  1. Phone assessment

    Call us at (863) 445-7111 and describe the fixture and the problem. We ask about your shutoff valve, the sink type, and whether you have a garbage disposal.

  2. Shutoff and removal

    We shut off the angle stops, open the faucet to drain the line, and disconnect the supply lines.

  3. Prep and fit

    We clean the mounting surface, apply new Teflon tape to the threaded connections, and set the new faucet with its gasket or a thin bead of plumber's putty.

  4. Test and adjust

    We turn the water back on, run hot and cold for two minutes, and check every connection with a dry paper towel.

  5. Cleanup and walkthrough

    We wipe down the sink, cabinet floor, and countertop, then haul away the old fixture if you want.

Tools and methods we use

Each method answers a different question. Together they leave very little to guess.

Reaches the mounting nuts behind a sink where a standard wrench will not fit. It lets us remove and tighten faucet hardware without scratching the basin.

Used on supply lines and shutoff valves when fittings are tight or corroded. We use it with a cloth wrap to avoid marring chrome or brass.

Seals threaded connections on supply lines and shutoff valves. We use Teflon tape on most faucet threads and pipe dope on larger pipe fittings.

Checks your home's water pressure after the install. Normal residential pressure runs 40 to 60 psi; higher pressure can shorten faucet seal life.

Used when we replace supply lines with PEX tubing. It makes a secure, code-approved crimp connection that resists corrosion and hard water.

When to schedule faucet installation

  • You are remodeling a kitchen in South Lakeland and want a new pull-down faucet with a matching soap dispenser and disposal.

    We remove the old faucet, install the new one, connect the soap dispenser, and wire the disposal.

    Homes
  • A bathroom faucet in a Dixieland rental has been dripping for weeks and the handle is hard to turn.

    We replace the faucet with a new centerset or widespread model, install new supply lines, and check the drain assembly.

    Homes
  • You bought a new faucet online but the box is missing a mounting nut or the supply lines are too short.

    We check the box before we start and carry common adapters, nuts, and supply lines on the truck.

    Homes
  • An outdoor hose bib in your Lake Hollingsworth yard is leaking and the handle will not shut off completely.

    We replace the outdoor faucet with a frost-proof or standard hose bib, depending on your plumbing.

    Homes

How faucet installation works in Lakeland

Lakeland's water comes from the Floridan aquifer and carries dissolved calcium that builds up inside faucets and supply lines. That is why a faucet in a 1970s South Lakeland ranch may fail years before one in a newer home with a water softener.

  • Dixieland

    Many homes here were built in the 1920s and still have original plumbing. We often replace shutoff valves and supply lines during a faucet install.

  • South Lakeland

    Ranches built in the 1970s and 1980s commonly have hard water buildup. A new faucet plus a water softener can double fixture life.

  • Lake Morton

    Historic homes near the lake often have copper pipe with soldered joints. We check for pinhole leaks before connecting a new faucet.

Shower Repair in Lakeland : plumber replacing a clogged shower drain cover and cleaning debris from the drain opening
  • Dixieland
  • South Lakeland
  • Lake Morton
  • Christina
  • Kathleen

From problem to finished result.

Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.

Bathtub Installation in Lakeland : plumber connecting the overflow drain and shoe assembly to a new bathtub, working fromPhoto
  • Kitchen faucet swap in South Lakeland

    Before: A 1990s kitchen faucet was dripping steadily and the sprayer had lost pressure. The shutoff valve under the sink was corroded and would not close. The cabinet base showed old water stains.

    After: We installed a new Moen pull-down faucet, replaced both shutoff valves, and ran new braided supply lines. The drip stopped, the sprayer works at full pressure, and the cabinet is dry. The job took three hours.

  • Bathroom faucet upgrade in Dixieland

    Before: A 1950s bathroom had a widespread faucet with stiff handles and a slow drain. The supply lines were original and showed surface corrosion. The drain tailpiece was loose.

    After: We installed a new Delta widespread faucet, replaced the supply lines and tailpiece, and cleared the drain. The handles turn smoothly and the sink drains fast. The install took two hours.

  • Outdoor faucet replacement in Lake Hollingsworth

    Before: An outdoor hose bib was leaking at the handle and would not shut off completely. The pipe connection inside the wall was corroded, and the area around the foundation stayed wet.

    After: We replaced the hose bib with a frost-proof model, repaired the interior connection with a SharkBite fitting, and tested for leaks. The faucet shuts off fully and the foundation stays dry. The job took 90 minutes.

Faucet problems we solve in Lakeland

Most faucet calls come down to wear, water quality, or a failed connection.

Ask about yours

  • Dripping faucet that will not stop

    A steady drip wastes up to 3 gallons a day and stains the sink basin.

  • Low water pressure at the tap

    Low flow makes everyday tasks slow and often signals a clogged aerator or a failing supply line.

  • Corroded shutoff valve under the sink

    A shutoff valve that will not close means you cannot stop water during a repair or emergency.

  • Leaking supply line connection

    A slow leak at the supply nut can warp the cabinet base and promote mold.

Why upgrade your faucet now

A new faucet stops drips, improves water pressure, and can cut your water bill. Here is what a professional install gets you.

Stop the drip for good

A worn cartridge or corroded seat wastes up to 3 gallons a day.

Better flow, less buildup

Lakeland water carries calcium that clogs aerators and narrows supply lines. A new faucet with a clean cartridge restores full pressure at the tap.

Code-correct connections

Florida Building Code and the Uniform Plumbing Code require proper backflow protection and secure supply connections.

Fixture brands that last

We stock and install Moen, Delta, Kohler, and American Standard faucets because their cartridges and finish hold up in Florida humidity.

Faucet installation pricing in Lakeland

That includes labor, new supply lines, Teflon tape, and cleanup. A basic bathroom faucet swap sits at the low end.

Included

Quoted after a first look

  • Old fixture removal
  • New supply lines
  • New shutoff valve if needed
  • Leak test and pressure check
Request Service

What you receive

Clear records you can keep and share.

  • Written findings

    Notes on the shutoff valve and supply lines.

  • Install photos

    Before and after pictures of the connection.

  • Parts list

    Record of any valves or lines we replaced.

Before work starts

A plan in writing

Ask for a written scope

16 years of Lakeland faucet work

Lakeland Swancrest Plumbing has been installing and repairing faucets in Polk County since 2010.

Bathtub Repair in Lakeland : plumber patching a small chip in the enamel of a bathtub with a specialized repair kit

Shutoff valve

We close and reopen it to confirm it stops the water fully.

Supply line threads

We check for corrosion or cross-threading before connecting.

Drain assembly

We look for cracks or loose fittings that could leak later.

Do we cover your street?

Type your ZIP code or town. If yours is not listed, call and ask.

Lakeland ZIP codes

  • 33813
  • 33803
  • 33801
  • 33805
  • 33815
  • 33811
  • 33802
  • 33804
  • 33806

What Lakeland customers say

Our kitchen faucet had been dripping for months and the handle was stiff. The technician arrived in the afternoon, shut off the water, and had the new Moen installed in about two hours. He also replaced a corroded shutoff valve he found under the sink. The price matched the quote and he cleaned up everything.
Maria G.Homeowner, Dixieland
I bought a Delta faucet online and needed someone to install it. They checked the box for missing parts, installed it the next morning, and tested for leaks with a pressure gauge. The water pressure at the tap is much better than before. I will use them again for the bathroom.
Derek P.Homeowner, South Lakeland
We manage several rentals near Lake Morton and needed three bathroom faucets replaced in one day. The crew arrived on time, worked through the list, and left each unit clean. They noted a slow drain in one unit and cleared it while they were there. That saved us a second service call.
Angela R.Property Manager, Lake Morton

Faucet installation questions from Lakeland homeowners

Short answers for the first few minutes. The team can cover the rest.

Still have a question?

Describe what you are seeing and we will point you to the right next step.

(863) 445-7111

A basic bathroom faucet swap sits at the low end; a kitchen faucet with a pull-down sprayer, a garbage disposal connection, or a new shutoff valve pushes toward the high end. We give you a flat price before we start.

Yes. We install customer-supplied faucets regularly. Bring the fixture and all its parts; we will check the box for missing pieces before we begin. If the faucet needs an adapter or a different supply line than what came in the box, we carry common fittings on the truck.

A standard faucet swap takes two to four hours from shutoff to cleanup. Bathroom faucets usually run closer to two hours; kitchen faucets with a sprayer, soap dispenser, or disposal connection take three to four. If we find corroded shutoff valves or a damaged drain assembly, add 30 to 60 minutes for the repair.

We install both. Kitchen faucet installation in Lakeland, Florida often includes a garbage disposal or water filtration system connection. Bathroom faucet installation Lakeland FL work covers single-hole, centerset, and widespread fixtures, plus the drain assembly and supply lines. We also handle outdoor faucet installation Lakeland FL for hose bibs and utility sinks.

Need faucet installation Lakeland FL today?

(863) 445-7111

Call (863) 445-7111 and we will give you a flat price over the phone. Same-day slots are available most weekdays. We show up when we say we will, and we clean up before we leave.

Call or message us

Call (863) 445-7111 any time for emergency plumbing, or send a message and we will get back to you the same business day. Our office is open Monday through Friday, 8 a.m. Tell us what you are seeing and we will tell you what it likely is and what it takes to fix it.

Call now(863) 445-7111